Shop
Showing 841–852 of 1309 results
Kick Panel Screws – Hex Style
10 Pc Set of the Hex Style Screws used to hold Non A/C Kick Panels in place.
Buick has used Hex Style and Phillips Style Screws over the years. I offer both.
Correct for 1970 - 1972 GM A-Body Cars - (And I'm sure other years as well)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Kick Panel Screws – Phillips Style
10 Pc Set of the Phillips Style Screws used to hold Non A/C Kick Panels in place.
Buick has used Hex Style and Phillips Style Screws over the years. I offer both.
Correct for 1970 - 1972 GM A-Body Cars - (And I'm sure other years as well)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Kick Panel Screws – Wafer Style
10 Pc Set of the Wafer Style Screws used to hold Non A/C Kick Panels in place.
Buick has used Hex Style and Phillips Style Screws over the years. I offer both.
We have also encountered this style screw as well.
Correct for 1970 – 1972 GM A-Body Cars – (And I’m sure other years as well)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Kick Panels for cars with A/C
Kick Panels for A/C Cars
Fits 1968 – 1972
Available in Black Only – Can be painted other colors if needed.
Kick Panels for NON A/C Cars
Kick Panels for NON A/C Cars ( 2 Vent Handles per side)
Fits 1968 - 1972
Available in Black Only - Can be painted other colors if needed.
Note: We've seen some of these come through where the Cables need to be switched . . . Top on Bottom - Bottom on Top (For some reason the manufacture gets this mixed up) Easy Fix but . . . .
Kickdown Switch Bracket
If you have a Turbo 400 Trans this is the Bracket used to hold the Kickdown Switch in place
Fits 1968 - 1972 Skylark, GS & GSX
.
Please Note: If you're converting to a TH400 car from a TH350 car please keep in mind the Gas Pedal Arm is different. The TH350 version has an extra "arm" on it for the Kickdown Cable. That may interfere with the TH400 Kickdown Mechanism. (Shown in Photo below)
.
.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
.
.
Photo below shows the TH350 Gas Pedal with the additional arm for the kickdown cable.
A TH400 Gas Pedal assembly does not have the additional arm since the kickdown is controlled by an electronic switch.
[gallery ids="12926"]
.
License Plate / Fuel Door Light Gasket
Replacement Gasket for your License Plate Light
Fits 1968 - 1972 Skylark, GS & GSX
Note: New Lens also available!
.
License Plate / Fuel Door Light Kit
Reproduction License Plate Light used by many GM Muscle Cars back in the day.
Includes new Lens as well.
Fits 1968 - 1972 Skylark, GS & GSX (Maybe More)
Note: This part may need the actual connector to the Tail Light Harness swapped out.
GM used different connectors on BOP & Chevrolet. Simple Fix but . . . . I believe they catered to the Chevy's!
.
[gallery ids="12759,12760"]
Sale!
$13.00
Add to cart
License Plate / Fuel Door Light Lens
Nice replacement if you're still using an OEM License Plate Light.
Fits 1968 - 1972
Note: New Gaskets are also available!
.
License Plate Bracket / Fuel Door – 1970
Nice Reproduction of the License Plate Bracket / Fuel Filler Door
Fits 1968 - 1970
.
License Plate Bracket / Fuel Door – 1971 & 1972
Nice Reproduction of the License Plate Bracket / Fuel Filler Door
Fits 1971 & 1972 Skylark, GS & GSX Rear Bumpers
If you need the Rubber Bumpers click here
.
License Plate Bracket Rubber Bumper (1970)
Reproduction Rubber Bumper for License Plate Brackets
Fits 1970 Style Bumpers for the License Plate Bracket (or anything with a 3/8″ hole)
$4.00 is for the PAIR
Note: These fit perfect in a 3/8″ hole. Please check the hole size if using on other years.
Another trick if using in a hole bigger than 3/8″ is to use a washer BEHIND the rubber bumper to keep it in place.
Side Note: In 1970 these rubber bumpers were inserted into the Bumper itself.
In 1971 & 1972 they were inserted into the License Plate Bracket (which does have a 5/16″ hole)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Note: These fit perfect in a 3/8″ hole. Please check the hole size if using on other years.
Another trick if using in a hole bigger than 3/8″ is to use a washer BEHIND the rubber bumper to keep it in place.
Side Note: In 1970 these rubber bumpers were inserted into the Bumper itself.
In 1971 & 1972 they were inserted into the License Plate Bracket (which does have a 5/16″ hole)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!