Shop
Showing 1177–1188 of 1310 results
Throttle Return Spring Bracket
This is a nice reproduction of the Throttle Return Spring Bracket used on Buick V8 Motors
Fits 1967 - 1972
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Throttle Return Spring Bracket (OE)
Factory GM Throttle Return Spring Bracket
Factory Original GM Piece
I believe this style was found on early 1970 models (Skylark, GS & GSX)
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
.
. 
Throwout Bearing – Manual Trans
Correct Throwout Bearing for the Muncie 4 Speeds used on our GS & GSX's
Fits 1968 - 1972
.
Tie Rod (Inner – 1968 – 1970)
5/8" Inner Tie Rod for 1968 - 1970 Buick's
Notes:
- Be sure to order the correct size when purchasing Tie Rod Sleeves. (Buick used two sizes between 1970 & 1971/72)
- The Grease Zerk is on the End of the Tie Rod (NOT the bottom as shown in the photo)
Tie Rod (Inner – 1971 – 1972)
11/16" Inner Tie Rod for 1971 - 1972 Buick's
Note: Be sure to order the correct size when purchasing Tie Rod Sleeves.
Buick used two sizes between 1970 & 1971/72
.
. Tie Rod (Outer – 1968 – 1970)
5/8" Outer Tie Rod for 1968 - 1970 Buick's
Notes:
- Be sure to order the correct size when purchasing Tie Rod Sleeves. (Buick used two sizes between 1970 & 1971/72)
- The Grease Zerk is on the End of the Tie Rod (NOT the bottom as shown in the photo)
Tie Rod (Outer – 1971 – 1972)
11/16" Outer Tie Rod for 1971 - 1972 Buick's
Note: Be sure to order the correct size when purchasing Tie Rod Sleeves.
Buick used two sizes between 1970 & 1971/72
.
. 
Tie Rod Sleeve Bolts
Tie Rod Sleeve Bolts
Black Phosphate Bolts and Phosphate Locking Nuts 1970 - 1972 Buick GS, GSX & Skylark (Maybe more!) Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it!
Tie Rod Sleeves (1964 – 1970)
Tie Rod Sleeves
Typically used on 1964 - 1970 Buick's
Note: Buick used 2 different diameters on these so be sure you know the size you need! These typically fit the 5/8" Diameter Tie Rods!
.
Tie Rod Sleeves (1971 – 1972)
Tie Rod Sleeves
Typically used on 1971 - 1972 Buick's
Note: Buick used 2 different diameters on these so be sure you know the size you need! These typically fit the 3/4" Diameter Tie Rods!
.
