Shop

Bypass Hose & Clamp Kit

Bypass Hose & Clamp Kit Fits 400 / 430 / 455 Engines .

$18.00 Add to cart

Caliper Piston Return Spring

Caliper Piston Return Spring - 1 required per Disc Brake Caliper $2.00 Each Source - AMK

$2.00 Add to cart

Due to a lack of profit margin on Carpeting I no longer sell the Carpet Kits. I do recommend the ACC Brand and I recommend ordering a carpet kit for a Bucket Seat / Column Shift car regardless of the cars seat/transmission option. If you have a 4 speed car and order a 4 speed carpet kit you'll be disappointed! They're designed for Chevelle's which have a much bigger hump in the floor for there 4 speeds. So stick with a Bucket Seat/ Column Shift kit for the best fit in our 1970 to 1972 Skylarks/GS/GSX!

$0.00 Add to cart

Castle Nut Set Steering

GM Castle Nuts and Cotter Pins for Tie Rods, Ball Joints, Pitman Arm & Idler Arm Fits 1964 - 1972 Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ? Give me a call, we probably have it!

$14.00 Add to cart

Center Cap – Single (1970)

A nice reproduction Center Cap featuring the Buick Tri Shield Correct for 1970 Models Also includes Locking Bar to lock the cap to your wheel! Note: The manufacture does NOT provide Screws for the Locking Bars so you will need to come up with those. Typically these are a #10 screw (Self Tapping) $45.00 for 1 single cap The photo below shows the locking bar which can be installed with a couple screws to lock the center cap to the wheel. You can't pull the center cap off without removing the wheel. That way nobody can steal your caps!

Also Note: The screws that the manufacture provides we feel are to short to do there job properly so we swap them out with longer screws. We also assemble the caps prior to shipping them. You will not get this service with any of the big name vendors! The photo below shows the Supplied screw size on the left and the size we swap out on the right. These are the 4) screws that hold the retainer to the cap. (Not the Locking Bar Screws)

.

$45.00 Add to cart

Center Cap – Single (1971/72)

Nice reproduction of the Center Cap used in 1971 & 72 $45.00 for 1 single cap Note: These have the correct Silver Background (Not Black which was used in later years! .

$45.00 Add to cart

Center Cap Emblem

Center Cap Insert used on 1970 Center Caps Features the Buick Tri Shield Design $22.00 Each .

$22.00 Add to cart

Center Caps – Set of 4 (1970)

A nice reproduction set of Center Caps featuring the Buick Tri Shield Correct for 1970 Models Also includes 4 Locking Bars to lock the caps to your wheels! Note: The manufacture does NOT provide Screws for the Locking Bars so you will need to come up with those. Typically these are a #10 screw (Self Tapping) $179.00 for a set of 4 Also sold individually

The photo below shows the locking bar which can be installed with a couple screws to lock the center cap to the wheel. You can't pull the center cap off without removing the wheel. That way nobody can steal your caps!

Also Note: The screws that the manufacture provides we feel are to short to do there job properly so we swap them out with longer screws. We also assemble the caps prior to shipping them. You will not get this service with any of the big name vendors! The photo below shows the Supplied screw size on the left and the size we swap out on the right. These are the 4) screws that hold the retainer to the cap. (Not the Locking Bar Screws)