Shop
Showing 1273–1284 of 1296 results
Wiper Motor – OE (Concours Quality)
After trying several Reproduction Wiper Motors only to have ALL of them fail we now have original GM Motors restored to concours level.
There is a reason you cannot find or purchase the aftermarket Wiper Motors through my website.
If you've been there - done that then this is the best option out there!
These are Top Notch restorations using American Parts and guaranteed to work!
Fits 1970 - 1972 Skylark, GS & GSX with hidden (Recessed) Wipers
Source - Original GM
Note: These typically sell out within a day of posting them so if you would like one from our next batch please contact me and I'll put your name on our list to contact once the next batch is ready!
We have another batch "in the works" we hope to receive in May of 2022! You can order now and get on the list! (Your Credit Card will NOT be charged until I have a motor ready to send to you)
Wiper Motor Arm
Wiper Motor Arm used on Buick Wiper Motors
Fits 1968 - 1972
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Wiper Motor Gasket
This is the correct Gasket to mount the Wiper Motor to the Firewall
Fits 1968 - 1972 GM A Body
.
Wiper Motor Harness
Wiper Motor Harness
This is correct for a 1970 - 1972 Skylark, GS or GSX (maybe others?)
This would install in the Bulkhead via the 3 Bare Wire Terminals shown in the photo and then is simply plugs into your Wiper Motor and Washer Pump.
These are NOT sold individually so it's not something you could typically purchase. (You would have to purchase an entire headlight harness to get this section)
This one was removed from a Race Car that was not using Wipers . . . .
This has been SOLD!
.
Wiper Motor Mounting Hardware (Deluxe Kit)
1968 – 1972 Buick Wiper Motor Mounting Kit with Ground Strap
Kit includes:
- 3) Wiper Mounting Grommets
- 3) Wiper Motor Mounting Bolts
- 1) Ground Strap
- 5) Wiper Arm Transmission Mounting Bolts
- 2) Squirter Mounting Screws
Wiper Motor Mounting Kit
1968 - 1972 Buick Wiper Motor Mounting Kit with Ground Strap
Kit includes:
- 3) Wiper Motor Mounting Grommets
- 3) Wiper Motor Mounting Bolts
- 1) Ground Strap
Wiper Motor Transmission Clip
This is the Clip that holds the wiper transmission to the wiper motor bracket
Fits 1964 - 1972
Note: Wiper Motor Arm NOT included. For photo purposes only. (Sold Separately)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Wiper Switch Ground Tab – OE
This is an OEM Part
Windshield Wiper Switch Ground Spade
These are NOT currently reproduced.
Fits 1970 – 1972 Wiper Switches
These have now sold out but I'm leaving them on here so our customers can see what is needed in case they're missing it.
Note: Because Buick used a Plastic Dash Bezel it is required to Ground the Headlight Switch & the Windshield Switch!
Photo below shows the Factory Grounds for the Headlight Switch and the Wiper Switch.
These should be in use for each switch to work properly.
Each one shown here installed correctly
This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one!
.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
Wiper Transmission Mounting Hardware
Buick Wiper Transmission Mounting Hardware
Fits 1964 - 1972
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Wire Clip (Firewall)
This clip is generally used to hold the Blower Motor Wire near the Heater Core Cover
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Wire Harness “J” Clip
This is the Clip Buick used to hold the Engine Wire Harness to the Firewall.
I've seen some cars with just 1 clip and other cars with 2 clips.
Fits 1970 - 1972
$3.00 Each
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Wire Harness Fastener – 3″ Version
This is the 3" Factory Wire Harness strap used on the Core Support for the Headlight Harness as well as the Fuel Tank Sending Unit wire.
These are probably used in other areas as well but these are the main locations on 1970 - 1972 Models
$2.00 Each
Fits 1970 - 1972 Skylark, GS & GSX
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!