OEM Parts

Showing 13–24 of 73 results

Bucket Seat Release Button Retainers (Pair)
Factory GM Bucket Seat Release Button Retainers (Pair) Factory Original GM Pieces These are used to keep the Seat Release Buttons in place. Correct for 1969 - 1972 GM Bucket Seats     OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”     .
$15.00 Add to cart
Bucket Seat Spring
Factory Bucket Seat Track Spring This is the main spring used on Bucket Seats to aid in moving the seat back and forth Fits 1968 - 1972 (Maybe more) 4 of these available . . .     OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”      
$5.00 Add to cart
Bumper Brackets – 1970 Front (NICE!)
  These have SOLD . . . .     This is an OEM Part  Cleaned, Bead Blasted and Powder Coated  "Chassis Black" Fits 1970 or 71 / 72 If doing a front end swap. These are really nice Brackets with nearly no pitting. Part Numbers clearly visible. Super Nice Set! This is a complete set. 1970 Brackets are the toughest to find because so many people "Clone" the 1970 Models. If you're doing a Concours Build these brackets are NICE! . This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one! . OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”    
$0.00 Read more
Bumper Brackets – 1970 Rear – Nice!
  These have SOLD . . . .     This is an OEM Part  1970 Skylark, GS & GSX Rear Bumper Brackets. (Concours Level) These are clean and powder coated and are virtually "Pit Free"  - MINT! Fits 1970 Skylark, GS & GSX or a 1971 - 1972 with a 1970 Rear Bumper GM Part # 1233130 & 1233130   Note: If you're looking for a Concours Set this is it! . This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one! . OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality"    
$0.00 Read more
Choke Assembly – 1970 – 455
This is an OEM Part  This is a Super Nice Original Choke Assembly that we sent out and had re-plated. This is a Factory Choke Assembly that is correct for the 1970 455 Engines with an Automatic Trans GM Part Number 1232261 . Note: This will ONLY fit a 1970 455 Intake Manifold due to its bolt pattern! . This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one! .         OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”   .
$0.00 Read more
Engine Bolts – Assortment (Factory GM)
I have a Drawer full of Factory GM Engine Bolts from 350 & 455 Engines If you need a particular engine bolt give me a call! Most of them are clean and ready to install   Here's a portion of what I have:   (If it's not listed I probably have it!)
  • Intake Bolts
  • Head Bolts
  • Timing Cover Bolts
  • Starter Bolts
  • Alternator mounting Bolts
  • Oil Pan Bolts
  • Valve Cover Bolts
  • Oil Pump Housing Bolts
  • Harmonic Balancer Bolts
  • Rocker Arm Bolts
  • Windage Tray Bolts
  .
$0.00 Add to cart
Exhaust Manifolds w/Correct Bolts – OE
This is an OEM Part    -   This set has SOLD  -  Check back as we may get more! Cleaned, Sand Blasted and Painted with High Temp Exhaust Paint. Fits 400, 430 & 455 Engines but correct 1971 & 1972 Engines (Per Part Numbers) Also included are the Correct Reproduction Exhaust Manifold Bolts!   Part Numbers: Driver Side = 1233451 Passenger Side = 1238094   Please Note:  These are very nice Manifolds with very little pitting other than the Front 4" on the Passenger side Manifold. Also, there are two broken studs on the outlets that will need to be drilled and re-tapped!  (Priced lower than normal because of that) These have been seen on E-Bay for $300+ and don't look anywhere near as nice as these nor to they include brand new hardware!   OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”    
$0.00 Read more
Factory Floor Shift Hardware
Factory GM Floor Shift Hardware Used to attach the Shift Handle Cradle AND the Detent Plate. Factory GM bolts. 4 bolts total for $10 Used on 1970 - 1972 Buick Skylark, GS & GSX Floor Shifters   OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”     .
$10.00 Add to cart
Fan Blade (4 Blade) – 350 & 455
This is an OEM Part  Cleaned, Bead Blasted and Primed. Fits 1970 - 1972 Skylark, GS & GSX with 350 & 455 Engines without A/C or Heavy Duty Cooling This fan is in nice shape. No Pitting. No Dents. Correct OEM Spacer also included.     OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”    
$10.00 Add to cart
Fan Blade (5 Blade) – 20″ Diameter
. This item is currently SOLD OUT . This is an OEM Part  Cleaned, Bead Blasted and Powder Coated Typically found on 1971/72 Skylark, GS & GSX with 455 and A/C or Stage 1 Engine   Note:  Due to the 20" diameter you cannot use this fan with a 1970 Fan Shroud! . This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one! . OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”    
$0.00 Read more
Fan Blade (7 Blade) – 18″ Diameter
. This item is currently SOLD OUT . This is an OEM Part  Cleaned, Bead Blasted and Powder Coated Correct for 1970 Skylark, GS & GSX with 350 Engine (with A/C) & 455 with A/C or Stage 1 Engine . This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one! . OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”    
$0.00 Read more
Fan Spacer – OE
This is an OEM Part  Cleaned, Bead Blasted and Painted This is a Factory Fan Spacer that was used by Buick in place of a "clutch fan" on certain models     OEM Parts are Original Equipment that came off a “Parts Car”. Any of our OEM Parts will always be at least “Driver Quality”  
$10.00 Add to cart