New Products

Showing 97–105 of 105 results

Trunk Hardware Kit
This is the correct hardware for your Trunk area. Kit includes the following:
  • 1)  Zinc Ground Screw for Rear Light Harness
  • 1)  Zinc Screw for Trunk Light
  • 1)  Trunk Lock Retainer Screw
  • 4)  Trunk Lid Mounting Bolts
  • 5)  Trunk Latch and Striker Bolts
  Fits 1970 – 1972   Skylark, GS & GSX     The correct stuff if you're doing a Concours Restoration!   Note: GM used a Screw in some cars and a Rivet in other cars to secure the Trunk Lock Retainer. Both are correct! We supply the screw simply because we do not have a supplier for the correct "GM" rivet. I'm uploading the Fisher Body Service Manual Diagram to show that both were used and either should be accepted in any judging events!   Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!    
$16.00 Add to cart
Trunk Trim Mounting Clips ( 6 Pcs )
Stainless Trunk Trim Clips  (6 Pc Kit as used by BUICK) Fits 1970 - 1972 Stainless Trunk Trim         Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
$14.00 Add to cart
Vacuum Hose Kit for GS Air Cleaner

1970 - 1972 GS & GSX Air Cleaner Vacuum Hose Kit

This kit gives you enough Vacuum Hose and Factory Routing instructions to properly route your hoses to your GS Air Cleaner. 1) Tee Fitting & Hose also included for proper hook up to the Vacuum Tree Fitting. This kit is designed for the 1970 – 1972 350 & 455 GS/GSX Air Cleaners. Our Vacuum Tubing is consistent with the size Buick used on there 350 & 455 Engines.     [gallery ids="12492,12493"] .
$12.00 Add to cart
Vacuum Switch Hose Kit w/ Routing Instructions
This kit gives you enough Vacuum Hose and Factory Routing instructions to properly route your hoses for the Thermo Vac Switch as well as the TCS (Solenoid) Kit Includes the following:
  • Vacuum Tee Fitting
  • Enough Hose to route as the Factory did
  • Routing Instructions and Diagram
  This kit is designed for the 1970 - 1972 Buick V8 Engines Our Vacuum Tubing is consistent with the size Buick used on there 350 & 455 Engines.     Photo below shows our Tubing next to a piece of factory tubing (For size comparison) There are a lot of other retailers selling Vacuum Tubing that is much thicker than what the factory used.   If you need a Vacuum Switch click Here >  3 Port Vacuum Switch    
$17.00 Add to cart
Vapor Line Clamp Kit
24 Pc Vapor Line Clamp Kit This kit provides all the correct clamps needed to mount your Vapor Lines Fits all 1970 - 1972 with the Evaporative System     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
$16.00 Add to cart
Wheel Well Trim Screws – Version # 1
34 Pc Set of Wheel Well Trim Screws This kit contains 2 versions as found on Buick's in 1970. The general consensus is these are used on the 1970 Model Year. . This Style used on the Rear . . .Kit includes 18 + 1 Extra . This Style used on the Front . . .Kit includes 14 + 1 Extra . Note: Some rear wheel trim has 8 holes while others have 9 holes. Any extra holes may be from Mud Flaps or "Drain Holes" . Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it! .
$14.00 Add to cart
Wheel Well Trim Screws – Version # 2
34 Pc Set of Wheel Well Trim Screws (Chrome Finish) This kit contains 1 of the 4 versions used by Buick from 1970 - 1972. The general consensus is these are used on the 1971 & 1972 Model Year. . . . Note: Some rear wheel trim has 8 holes while others have 9 holes. Any extra holes may be from Mud Flaps or "Drain Holes"     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it! .
$14.00 Add to cart
Wheel Well Trim Screws – Version # 3
34 Pc Set of Wheel Well Trim Screws  (Zinc Finish) Panhead design - no built in washer . . . . This kit contains 1 of the 4 versions used by Buick from 1970 – 1972. . . . Note: Some rear wheel trim has 8 holes while others have 9 holes. Any extra holes may be from Mud Flaps or "Drain Holes"     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it! .
$14.00 Add to cart
Wheel Well Trim Screws – Version # 4
34 Pc Set of Wheel Well Trim Screws  (Zinc Finish) This kit contains 1 of the 4 versions used by Buick from 1970 - 1972. The general consensus is these are used on the 1971 & 1972 Model Year. .   . . Note: Some rear wheel trim has 8 holes while others have 9 holes. Any extra holes may be from Mud Flaps or "Drain Holes"     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it! .
$14.00 Add to cart