Interior
Showing 61–72 of 142 results
Door Panel Lock Ferrules
Door Panel Lock Ferrules (Pair)
$9.00 is for a Pair of these Fits 1964 - 1972 .
. 
Door Sill Plates – Pair
Door Sill Plates (Pair)
Fits 1968 - 1972 Skylark, GS & GSX Original GM Style with "Body by Fisher" riveted tags. .
Floor Mats
Reproduction Buick Floor Mats - Set of 4
Fits 1968 - 1972 A-Body Buick's * (See note below)!
Note: We can get these in other colors. Call for details and info on color matching!
Also, be aware that other vendors do offer these for the BIG cars also however they are not the same shape that our A-Bodies require!! So if you purchase elsewhere make sure you're getting the A-body version!
.
Floor Pan Plugs
7 Pc Floor Pan Plug Set
These are the correct Floor Pan Plugs used in the GM A-Body Cars
Floor Shift Console Door Lid
Reproduction Console Door Lid for Automatic "Floor Shift" Cars
Fits 1970 - 1977 Buick Consoles
Features the correct "Pebble Grain" texture.
This can be used in conjunction with the Chrome Top - Item # CP 5616 S
Lid Shown below after Chrome Top & Woodgrain Kit installed
(Both Sold Separately)
Floor Shift Console Top “Door Insert”
This is the Chrome Insert that is mounted to the Floor Shift Console Door (Door Lid itself not included)
Fits 1970 - 1977 Buick Consoles
This can be used in conjunction with our Replacement Lid Item # 1232871
Cover Shown below with Lid & Woodgrain Kit installed (Both Sold Separately)
Cover Shown below with Lid & Woodgrain Kit installed (Both Sold Separately)
Floor Shift Console Top Insert “Buick”
"Buick" nameplate (emblem) that mounts inside the Floor Shift Console
This is a nice reproduction!
Fits 1970 - 1972
If you need the Correct Hardware for your Floor Shifter be sure to check out our Floor Shift Hardware Kit
.
Floor Shift Console Wood Grain Decal Kit
Wood Grain Decal Kit for the Automatic Floor Shift Console.
Fits 1970 - 1972 Buick Consoles
(Lower priced alternative to our Concours Level Decal Set)
If you need the Correct Hardware for your Floor Shifter be sure to check out our Floor Shift Hardware Kit
.
Floor Shift Console Wood Grain Decal Kit – Mark Wajda Version
Wood Grain Decal Kit for the Automatic Floor Shift Console.
These are produced by Mark Wajda - same manufacture of the Quality Dash Decal Sets we carry.
Fits 1970 – 1972
If you need the Correct Hardware for your Floor Shifter be sure to check out our Floor Shift Hardware Kit
Note: Console NOT included!
Floor Shift Handle (Black)
Nice reproduction of the black shift handle used on Floor Shifters
Fits 1970 - 72 (Correct for 1971 & 72)
If you need the Correct Hardware for your Floor Shifter be sure to check out our Floor Shift Hardware Kit
Note: When installing the screws that hold the handle in place be sure to place some lube on them and install slowly!! (Otherwise you can crack the plastic handle)
Floor Shift Handle (Woodgrain)
Nice reproduction of the woodgrain shift handle used on Floor Shifters
Fits 1970 - 72 (Correct for 1970) - Woodgrain Version
If you need the Correct Hardware for your Floor Shifter be sure to check out our Floor Shift Hardware Kit
Note: When installing the screws that hold the handle in place be sure to place some lube on them and install slowly!! (Otherwise you can crack the plastic handle)
Floor Shift Handle Cradle
This is the (Shifter Cradle) for the Automatic Floor Shift assembly used by Buick
Fits 1970 - 1972
4 pcs total
It is crucial that you use the Proper Phillips Screws when installing the Handle and Pull bar or the shifter will not slide up and down properly!
If you need the Correct Hardware for your Floor Shifter be sure to check out our Floor Shift Hardware Kit
Note: If you're also using the aftermarket Chrome Shifter Handle Insert you will want to drill out the holes shown below to 5/16". We've found that the Chrome Shifter Handle Inserts are a tad to short to properly snap into the shifter cradle. See photos below for more on this!
The Circled area shows the hole that needs to be "enlarged". In most cases you can simply drill this hole out to 5/16". (It's currently a 1/4" hole) The bigger hole allows for the Tabs on the Chrome Insert to lock in place. IF you still have a Factory Handle Insert then you may not need to do this.
If needed you can also take a hand file or dremel tool and enlarge the hole towards the TOP!
This will allow the Chrome Insert to Snap in to place easier.
You're basically enlarging the holes so that the Shifter Insert Tabs will snap in to the Cradle better.
Note: If you're also using the aftermarket Chrome Shifter Handle Insert you will want to drill out the holes shown below to 5/16". We've found that the Chrome Shifter Handle Inserts are a tad to short to properly snap into the shifter cradle. See photos below for more on this!
The Circled area shows the hole that needs to be "enlarged". In most cases you can simply drill this hole out to 5/16". (It's currently a 1/4" hole) The bigger hole allows for the Tabs on the Chrome Insert to lock in place. IF you still have a Factory Handle Insert then you may not need to do this.
If needed you can also take a hand file or dremel tool and enlarge the hole towards the TOP!
This will allow the Chrome Insert to Snap in to place easier.
You're basically enlarging the holes so that the Shifter Insert Tabs will snap in to the Cradle better.