Exterior Parts
Showing 73–84 of 155 results
Headlight Adjustment Screws – 4 Pc Kit
Reproduction Headlight Adjustment Screws that snap into the Core Support.
Sold in Packs of 4 for $12 or Packs of 8 for $24
This is the 4 Pack and Black in color (half of what is needed for 1 car)
We offer this kit for the guy that only needs a couple extra's rather than having to purchase all 8
Fits 1970 - 1972
Note: These can be tricky to install. We recommend installation by someone that is familiar with these! See photos below to see how we install them . . .
Photo below shows the Adjuster in place. Notice the Tab (Circled in Yellow) that needs to be installed on the backside of the Sheet Metal.
We use a 3/8" (Deep well) socket to install the adjusters . . .
Tap them in place "gingerly"
Photo below shows the Adjuster installed properly. Notice the Tab is no longer visible because it's on the backside of the Sheet Metal.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
We use a 3/8" (Deep well) socket to install the adjusters . . .
Tap them in place "gingerly"
Photo below shows the Adjuster installed properly. Notice the Tab is no longer visible because it's on the backside of the Sheet Metal.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Headlight Adjustment Screws – 8 Pc Kit
Reproduction Headlight Adjustment Screws that snap into the Core Support.
8 Pack for $24.00 - Black in color
Fits 1970 – 1972
Note: These can be tricky to install. We recommend installation by someone that is familiar with these! See photos below to see how we install them . . .
Photo below shows the Adjuster in place. Notice the Tab (Circled in Yellow) that needs to be installed on the backside of the Sheet Metal.
We use a 3/8" (Deep well) socket to install the adjusters . . .
Tap them in place "gingerly"
Photo below shows the Adjuster installed properly. Notice the Tab is no longer visible because it's on the backside of the Sheet Metal.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
We use a 3/8" (Deep well) socket to install the adjusters . . .
Tap them in place "gingerly"
Photo below shows the Adjuster installed properly. Notice the Tab is no longer visible because it's on the backside of the Sheet Metal.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Headlight Bezel Nut & Screw Kit
16 Pc Headlight Bezel Nut & Mounting Screw Kit
Fits 1970 – 1972
A good tip for installing the Bezel Nuts is to install them in the Core Support and then with a 1/8" Punch gently tap the pin in a tad giving you some room to get the screw started. Once the screw starts to bite it will be "Self Threading" and will push the pin through a bit more which in turn holds the Bezel Nut into the Core Support Securely.
Install the Bezel Nut into the Core Support before tapping the pin.
The key here is to Gently tap the pin in just enough so that the screw can start to "Self Tap" into the Bezel Nut.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
The key here is to Gently tap the pin in just enough so that the screw can start to "Self Tap" into the Bezel Nut.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Headlight Mounting Screws
Factory GM Style Phillips Screws used to hold the Headlights in place.
Set of 12 for $24
Fits 1964 - 1972
Note: Although fairly expensive this set replicates the screws used by GM better than any other source we've found.
To be factory correct these should be painted "Black"
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Headlight Mounting Screws – Stainless (12 Pc Kit)
Not 100% correct but once installed these look factory and are made out of Stainless so they won't rust.
These are what we generally used on our Restorations unless the customer wants OEM screws.
Set of 12 for $12
Fits 1964 - 1972
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Headlight Pad Set
12 Pc Headlight Pad Kit typically found on the 1971 & 1972 Core Supports for the headlights to ride on.
.
Sale!
$140.00
Add to cart
Headlight Set (T-3’s)
T3 Headlight kit as used by Buick (Set of 4)
Fits 1968 to early 70's that use 4 headlights
.
Headlight Spring Kit
4 Pc Headlight Spring Kit
Fits 1970 - 1972 Skylark, GS & GSX
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Sale!
$39.00
Add to cart
Headlight T-3 (Inner)
Inner T-3 Headlight Bulb (We sell these in Kit Form or individually for those needing just one)
$39.00 Each
Source – Lectric Limited
.
Sale!
$39.00
Read more
Headlight T-3 (Outer)
Outer T-3 Headlight Bulb (We sell these in Kit Form or individually for those needing just one)
$35.00 Each
Source - Lectric Limited
.
Headlight Trim Ring Set
Set of 4 Headlight Trim Rings
Stainless Steel Factory Reproductions
Fits 1964 - 1972
.
Hood Release Handle
Reproduction Hood Release Handle
Fits 1970 - 1972 Skylark GS & GSX
Note: Retaining Clip also available if needed
.