Engine Parts
Showing 49–60 of 189 results
Bolt – Valve Cover w/Stud – Chrome
This is the Correct Valve Cover Bolt w/Stud for the Spark Plug Retainer used in conjunction with the Chrome Valve Covers
$5.00 Each or Be sure to check out our Complete Kit if you want the whole set.
Note: We do have a "Kit" for these if you need all of them. . . . .
Also, please be aware that other vendors are selling Zinc Plated Hardware which may be labeled as "Chrome". Ours are Chrome Plated as were the originals!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Bolt – Valve Cover w/Stud – Zinc
This is the Correct Valve Cover Bolt w/Stud for the Spark Plug Retainer used in conjunction with the Painted Valve Covers
This Bolt has a Zinc Finish and can be painted to match the valve covers.
$5.00 Each - Or be sure to check out our Complete Kit if you want the whole Set.
Note: We do have a "Kit" for these if you need all of them. . . . .
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Bolt Kit – 400/455 Valve Cover Bolt Kit – Chrome
These are the Correct Chrome Valve Cover Bolts found on the Buick Stage 1 400 & 455 Engines.
This is a 10 Pc Set
These are Chrome and can be used in conjunction with Chrome Valve Covers
Note: Please be aware that other vendors are selling Zinc Plated Hardware which may be labeled as "Chrome". Ours are Chrome Plated as were the originals!
Also Note that some vendors are selling a version that requires a 10mm Socket rather than the correct 3/8" size. No Metric Bolts were used on these cars back then!!
Correct Size! - Correct Chrome Plating!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Bolt Kit – 400/455 Valve Cover Bolt Kit – Zinc
These are the Correct Valve Cover Bolts found on the Buick 400/430 & 455
This is a 10 Pc Set
These are Zinc and typically used when painted to match the valve covers.
Note: Some vendors are selling a version that requires a 10mm Socket rather than the correct 3/8" size. No Metric Bolts were used on these cars back then!!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Bolt Kit – 455 Exhaust Manifold Bolt Kit – 1970 & 1971
These are the Correct "Ramp Lok" bolts that Buick used on the Exhaust Manifolds
This is a 14 Pc Kit
Fits 1970 - 1971 455 Engines with the correct 1970 - 1971 Exhaust Manifolds
These will NOT work on 350 Engines!
Note: IF your car doesn't have the Correct 1970 or 1971 Manifolds there may be a bolt or two that won't be the right size.
IF that's the case we certainly have the correct bolts but shipping fee's may be applied if we need to send out more bolts.
Our kit is designed for the Factory 1970 & 1971 455 Exhaust Manifolds. See part numbers below. . . .
Driver Side: 1233899 & 1233451
Passenger Side: 1383648 (IF your passenger Side Part # is 1238094 you'll need our 1972 Kit)
If you're not 100% sure on your Passenger Side Manifold simply order the 1972 Kit and you'll get 1 extra bolt that will cover EITHER manifold!
The Photo Below shows the difference in Manifolds.
Part # 1238094 uses a longer bolt at the Front vs the 1383648 which uses a shorter bolt:
Correct Torque Specs on these is 18 Foot Pounds!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Bolt Kit – 455 Exhaust Manifold Bolt Kit – 1972
These are the Correct "Ramp Lok" bolts that Buick used on the Exhaust Manifolds
This is a 14 Pc Kit + 1 Extra bolt for some applications.
Fits 1972 455 Engines with the 1238094 Passenger Side Manifold.
These will NOT work on 350 Engines!
Note: If your Motor has 1972 Exhaust Manifolds on it please double check your part #'s before ordering!
We have seen 2 different Passenger Side Manifolds in use by Buick.
This Kit is designed for the following Part Numbers used by Buick from 1970 - 1972 with the main focus being on the Passenger Side Manifold!
Driver Side: 1233899 & 1233451
Passenger Side: 1238094 (IF your Passenger Side Part # is 1383648 you'll need our 1970 - 71 Kit)
If you're not 100% sure on your Passenger Side Manifold just order this kit and you'll receive 1 extra Bolt so either Manifold will be covered!
The Photo Below shows the difference in Manifolds.
Part # 1238094 uses a longer bolt at the Front vs the 1383648 which uses a shorter bolt:
Correct Torque Specs on these is 18 Foot Pounds!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Bolt Kit – A/C Bolt Kit – 1969 & 1970
If you have the correct aluminum A/C Bracket used on 1969 & 1970 Models then this kit will mount your Compressor to the Motor
Fits 1969 & 1970 Big Block Cars with A/C
Best Bolt Kits on the Market found here at Stage 1 Restoration
Kit Includes:
- 2 Compressor Bolts
- 3 Bracket to Motor Bolts
- 4 Bracket Bolts & 1 Nut
Bolt Kit – A/C Bolt Kit – 1971 & 1972
If you have the correct Steel A/C Brackets used on 1971 & 1972 Models then this kit will mount your Compressor to the Motor
Fits 1971 & 1972 Big Block Cars with A/C
Best Bolt Kits on the Market found here at Stage 1 Restoration
Kit Includes:
- 2 Compressor Bolts
- 3 Bracket to Motor Bolts
- 7 Various Bracket Bolts
- 1 Nut & 1 Washer
Bolt Kit – Alternator – Non A/C
Correct Bolts used to mount your Non A/C Alternator & Bracket
Fits 350 - 400 - 455 without A/C
Kit includes:
- Long Alternator Mounting Bolt
- Medium Bolt & Star Washer (Holds Battery Cable also)
- Short Bolt
Bolt Kit – Exhaust Flange Bolts – 4 Pc Kit
These are the 4 bolts required to mount the Exhaust System to the Exhaust Manifolds
4 Bolts for $8.00
Fits 400 / 430 / 455
Source - Stage 1 Restoration
Note: Over the years if your Factory Exhaust has been worked on it probably has Studs at the end of the Exhaust Manifolds. These work fine but are incorrect. If you want the correct hardware on your car then these are it!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Bolt Kit – Oil Pan Bolts
Buick V8 Oil Pan Bolts
Fits Buick V8 Engines (18 Bolts in this Kit)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
.
Bolt Kit – Power Steering – 1969 & 1970
If you have a 1969 or 1970 Power Steering Set up this Bolt Kit will mount the Pump to the Engine
This is a 10 Pc Kit - Best Kits on the Market found here at Stage 1 Restoration
Fits 1969 - 1970 Big Block Steering Pumps
This Kit is the Hardware Only - Photos below show how it is mounted to the Engine . . . .
We also have a Complete Kit which Provides the Aluminum Bracket, the 2) Outer Steel Brackets and all the Mounting Hardware!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!