Engine Bay Parts

Showing 61–72 of 107 results

Hood Release Handle
Reproduction Hood Release Handle Fits 1970 - 1972 Skylark GS & GSX   Note: Retaining Clip also available if needed   .
$15.00 Add to cart
Hood Tach Harness Clip
Hood Tach Wire Harness Clip Clip used to attach the Hood Tach Harness to the Hood     .
$10.00 Add to cart
Horn Mounting Bolts
Horn Mounting Kit Kit Includes:
  • 2) Zinc Plated Bolts with Built in Star Washers
  • 2) Square Nuts to weld on Back Side of Horn Brackets
  Since the original style "Self Tapping" Zinc plated bolts are not reproduced we've come up with another way to mount the horns that looks factory when done.     We weld the Nuts on the back side of the horns as shown in the photo. That allows us to use a Standard thread Zinc Bolt with built in Star Washer. When done and mounted it looks like the factory bolts!      
$10.00 Add to cart
Inner Fender A Arm Seals (Pair)
Rubber Inner Fender A-Arm Seals  (Splash Shields) Mounting Staples Included Fits 1968 - 1972 $21 is for the Pair   .
$21.00 Add to cart
Inner Fender Repair Panel
Right Hand Side Inner Fender Patch Panel This is the Battery Side and is often in need of repair due to battery acid leaking in this area. We recommend having this installed by a decent body shop for best results. Fits 1970 - 72 Skylark, GS & GSX     The following photos show what's possible with a good body guy!     .
$99.00 Add to cart
Overflow Hose
Overflow Hose - Goes from the Radiator to the over flow tank.  (Bottom port) Length is 3 1/2 Feet so plenty long enough.  (Cut to length)    
$4.00 Add to cart
Overflow Hose Kit
Over Flow Hose Kit Kit provides both hoses and correct clamps as seen in our photo Fits 1970 - 1972 Skylark, GS & GSX   Note: Overflow Tank Sold Separately    
$20.00 Add to cart
Sale!
Overflow Recovery Tank – Black Lid
Reproduction of the Overflow Tank using the Black Lid Fits 1970 - 1972 Skylark, GS & GSX   Installation Tip: Prior to shipping these are inspected to make sure the Nipples are not broke. (2 total) One on top and one on the bottom. We then bubble wrap them so they do not break during shipping. They are fragile so use caution when installing your hoses. Do not "Force" them! If you're using the wrong size hose and force them the nipples can break and that is not a "warranty" situation. So take your time and install the hoses carefully! . If you need the correct mounting screws you can view them here > # 8 Mounting Screws .
$129.00 Add to cart
Overflow Recovery Tank – Clear Lid
Reproduction of the Overflow Tank using the Clear Lid Fits 1970 – 1972 but mostly seen on early 1970 Models!     These are due in soon!  
$0.00 Read more
Sale!
Overflow Recovery Tank & Hose Kit
Reproduction Overflow Tank & Hose Kit Kit contains the following:
  • Correct Ribbed Hoses
  • Correct GM Pinch Clamps
  • Recovery Tank
  Fits 1970 - 1972 Skylark, GS & GSX . Installation Tip: Prior to shipping these are inspected to make sure the Nipples are not broke. (2 total) One on top and one on the bottom. We then bubble wrap them so they do not break during shipping. They are fragile so use caution when installing your hoses. Do not "Force" them! If you're using the wrong size hose and force them the nipples can break and that is not a "warranty" situation. So take your time and install the hoses carefully! . . . If you need the correct mounting screws you can view them here > # 8 Mounting Screws . .
$149.00 Add to cart
Power Steering Pump Cap
Power Steering Pump Cap Correct for the 1970 - 1972 Power Steering Pumps (Fits other years as well) The Manufacture claims 1964-1979   .
$10.00 Add to cart
Radiator Cover & Fan Shroud Hardware Kit
Radiator Top Plate and Fan Shroud Hardware This Kit includes the following:
  • 2)  Fan Shroud Mounting Screws
  • 5)  Radiator Top Plate Mounting Screws
Fits 1970 - 1972 Buick GS, GSX & Skylark     Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models. Don’t see what you need ?  Give me a call, we probably have it!  
$10.00 Add to cart