Clips, Clamps & Brackets
Showing 109–120 of 142 results
Speedometer Cable Hold Down Bracket
Turbo 400 Speedometer Cable Hold Down Bracket
Fits GM Turbo 400 Transmissions from 1967 - 1973
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Speedometer Hold Down Bracket (Manual Trans)
This Bracket holds the Speedometer in place on Manual Transmissions
Fits 1968 - 1972
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Sport Mirror Mounting Bracket (Driver Side)
Reproduction Sport Mirror Mounting Bracket (Driver Side)
Includes Chrome Screw to hold the mirror to the Bracket
Fits 1970 - 1972
Note: An easy way to tell what side is which is the Driver Side Bracket has an indent in it for the Remote Control Cable
Also Note: If you're putting Sport Mirrors on a car that did not originally have them you will need to re-locate the Mounting area as well as the Mounting Holes. Sport Mirrors were mounted almost 3" further back than the Chrome Mirrors. The Mounting Holes are typically 2.5" (wide) when using the Chrome Mirrors vs. 2" when using Sport Mirrors. Different Brackets, Different Gaskets and Different Mounting Location!
Sport Mirror Mounting Bracket (Passenger Side)
Reproduction Sport Mirror Mounting Bracket (Passenger Side)
Includes Chrome Screw to hold the mirror to the Bracket
Fits 1970 - 1972
Note: An easy way to tell what side is which is the Driver Side Bracket has an indent in it for the Remote Control Cable
Also Note: If you're putting Sport Mirrors on a car that did not originally have them you will need to re-locate the Mounting area as well as the Mounting Holes. Sport Mirrors were mounted almost 3" further back than the Chrome Mirrors. The Mounting Holes are typically 2.5" (wide) when using the Chrome Mirrors vs. 2" when using Sport Mirrors. Different Brackets, Different Gaskets and Different Mounting Location!
Starter Mounting Clamp
This is an OEM Part
This is the Factory Clamp that mounts the Starter to the block giving it more rigidity.
These are often missing due to being somewhat hard to install.
Mounting Hardware included.
.
This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one!
.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
Sway Bar Brackets (Front)
Front Sway Bar Brackets
Fits 1968 - 1972 Skylark, GS & GSX
Sold as a Pair
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
.
T-350 Kickdown Cable Adjustment Clip (OE)
Factory GM Kickdown Cable Adjustment Clip
Factory Original GM Piece
These are very hard to find and used to adjust the kickdown on Turbo 350 Cars
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
.
. 
Tail Light Housing Clips
Tail Light Housing Clips & Screws to mount Tail Light Housings to your Bumper
Kit Includes:
- 4) Tail Light Housing Clips
- 4) Tail Light Housing Mounting Screws
TCS Wire Retainer
This clip holds your TCS Wire to your Muncie 4 Speed Transmission
Fits 1970 - 72
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Thermal Air Intake Vacuum Sensor Retainer
This is the Retainer that houses the Cold Air (Thermal Air Intake) Sensor to the Air Cleaner assembly
Fits 1968 - 1972
Note: Sensor also available if needed! (Engine Page)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Throttle Cable Bracket (455)
This is a nice reproduction of the factory 400/455 Throttle Cable Bracket
Fits 1968 - 1972 Big Blocks
Throttle Cable Retainer
This is the Retainer that holds your Throttle Cable to your Gas Pedal
Fits 1968 - 1972 (Maybe more)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!