Clips, Clamps & Brackets
Showing 1–12 of 128 results
4 Speed Shift Handle Bracket
This is the Bracket that holds your shift handle mechanism to the Transmission
Fits 1969 - 1972
4 Speed Shift Handle Bracket w/Bolts
4 Speed Shift Handle Bracket with Correct Bolts
Fits 1970 - 1972 GS & GSX with Muncie 4 Speed Trans
.
Air Cleaner Filter & Retainer Clip
This Kit provides the Air Cleaner Filter and Hard to find Clip to mount it.
Your Breather Hose from the Valve Cover also mounts to this Filter.
(Breather Hose sold separately if needed)
Fits 1968 - 1972 Buick V8 Engines
Air Cleaner Filter Retainer Clip
Air Cleaner Filter Retaining Clip
Correct Clip to hold the Breather/Filter assembly on the inside of your Factory Air Cleaner
.
Air Cleaner Support Bracket (350)
This is an OEM Part
Fits 1969 - 1972 Skylark, GS & GSX with 350 Engine
These are NOT currently reproduced and somewhat hard to find for the 350's.
Mounting Studs Included!
.
This Part has Sold Out but we leave hard to find parts like this on the website so you can use the photo and information to help locate one!
.
OEM Parts are Original Equipment that came off a “Parts Car”.
Any of our OEM Parts will always be at least “Driver Quality”
Air Cleaner Support Bracket Studs
These are the Studs & Nuts used on the Air Cleaner Support Brackets.
The studs mount the Water Neck and the nuts hold the Support Bracket in place.
$5.00 Per Pair
Fits 1969 - 1972 350/400/455 Engines
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
.
Air Cleaner Support Bracket with Mounting Studs (455)
Super nice reproduction of the Factory Air Cleaner Support Bracket found on the 455 equipped Cars.
These do not work on 350 Engines. They have there own version.
Mounting Studs included!!
Made in the USA
These will need to be Painted or Powder Coated
Note: Beware of another style that's being reproduced.
It does NOT have the correct curves in it like the version we offer does.
Our version is 100% Correct!
We also sell the Mounting Studs individually for these brackets if needed!
Also Note: This Bracket is intended to work with the Factory Cast Iron Intake Manifold and Quadrajet Carburetor. If you're using an aftermarket Carb or Intake you may need to customize the bracket to fit and function perfectly!
Alternator Adjustment Bracket (1968 – 1970)
Nice reproduction of the Alternator Adjustment Bracket used on 1968 - 1970 Big Block Cars
Correct for 400, 430 & 455 Buick Engines from 1968 to 1970
.
Alternator Adjustment Bracket (1971 – 1974)
Nice reproduction of the alternator adjustment bracket used on 1971 - 1974 Big Block Car
Alternator Bracket
This is a nice Reproduction of the Alternator Bracket used on Non A/C Cars with Buick V8 Engines
Fits 340, 350, 400, 430 & 455
GM Part Number 1380288
We do have a kit that includes the Hardware & the Bracket if you need both!
Battery Cable Clamps
These are the Factory Style Battery Cable Clamps used to mount the Positive Battery Cable
One mounts to the Inner Fender and one mounts to the Frame (2 Per Car)
These are somewhat hard to find!
Fits 1969 - 1972 Skylark, GS & GSX
$8.00 is for a Pair of them
Note: Mount with care as these are a bit fragile (Made out of Plastic)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
.
Bracket Bolt – Heater Hose Bracket
Correct Bolt for the Heater Hose Bracket found on 1969 - 1972 Intake Manifolds (Non A/C Cars)
Fits 1969 - 1972 Non A/C Cars
Source - Stage 1 Restoration
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!