Brakes
Showing 37–48 of 96 results
Disc Brake Conversion Kit (1970)
Complete Disc Brake Conversion Kit
This Kit Provides the same Pcs GM used on there 1970 GS, GSX & Skylarks
Fits - 1970 (And some earlier years as well)
If you're interested in one of these Kits please call Inline Tube directly. I use to stock these but they no longer have Dealer Pricing on them. They can also provide current pricing.
Inline Tube’s Complete Front Disc Brake Conversion Kits have every brand new factory-style component required – upper and lower – to convert your front drum brakes to disc brakes.
Includes:
- Spindles
- Hold-off valve
- Distribution block
- 1970 Master cylinder & lines
- Standard rotors
- Single-piston calipers
- Caliper brackets & backing plates
- Rubber brake hoses
- Hardware kit
Disc Brake Conversion Kit (1971 – 1972)
Complete Disc Brake Conversion Kit
This kit provides the same Pcs GM used on there 1971 & 1972 GS, GSX & Skylarks
Fits - 1971 & 1972
If you're interested in one of these Kits please call Inline Tube directly. I use to stock these but they no longer have Dealer Pricing on them. They can also provide current pricing.
Inline Tube’s Complete Front Disc Brake Conversion Kits have every brand new factory-style component required – upper and lower – to convert your front drum brakes to disc brakes.
Includes:
- Spindles
- 11” Booster
- Proportioning valve
- 1971/72 Master cylinder & lines
- Standard rotors
- Single-piston calipers
- Caliper brackets & backing plates
- Rubber brake hoses
- Hardware kit
Disc Brake Dust Shields
These are the Reproduction Dust Shields used on Disc Brake Cars
Correctly plated as well.
$69.00 Per Pair
Note: We have had to trim a small section of these in the past for clearance purposes.
This was VERY minor trimming but just a heads up!
.
Disc Brake Hose Brackets
These are the correct brackets to hold your Front Disc Brake Hoses to the Chassis
Sold as a Pair
Fits 1969 – 1972
Disc Brake Spindles
If you're converting to Disc Brakes these are the Correct Spindles for that swap
Sold as a Pair
Fits 1968 - 1972
.
.
. 
Distribution Block (1970)
This is the correct Distribution Block for 1970 Cars with Drum or Disc Brakes
Also is correct for 1971 / 1972 Cars with Drum Brakes (Not to be confused with the Proportioning Valve used on 1971/72 Disc Brake Cars)
.
Distribution Block (Combination Valve) – 1971/72
This is the correct Combination Valve for 1971 & 1972 Cars with Front Disc Brakes & Rear Drums.
Also called a Proportioning Valve (Different than the Distribution Block used in 1970!)
Note: There is a special took that makes Bleeding your Brakes MUCH easier and should be used with this particular Combination Valve.
You can see it here > https://www.stage1restoration.com/product/brake-proportioning-valve-bleeder-tool/
.
Drum Brake Adjuster Kit (Rear)
Drum Brake Adjuster Kit (Rear)
Fits 1964 - 1972 GM A Body
Helpful Hint:
The Zinc Adjuster assembly is for the Driver Side
The Gold Adjuster Assembly is for the Passenger Side
.
Drum Brake Adjuster Kit (Front)
Drum Brake Adjuster Kit (Front)
Fits 1968 – 1972 GM A Body
Helpful Hint:
The Zinc Adjuster assembly is for the Driver Side
The Gold Adjuster Assembly is for the Passenger Side
Note: To our knowledge nobody is reproducing the "Actuating Link" so when you're rebuilding your Front Drum Brakes be sure to keep the original.
.
. 
Drum Brake Hose Brackets
These are the correct brackets to hold your Front Drum Brake Hoses to the Chassis
Sold as a Pair
Fits 1964 - 1972
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Drum Brake Pads (Front)
Drum Brake Pads for Front Drum Brakes (Does both sides)
Fits 1964 - 1972
Note: Our current photo shows a set of Riveted Brake shoes. These are no longer available. They're now applied with an adhesive.
We'll be updating our photo soon . . .
.
Drum Brake Pads (Rear)
Rear Brake Pads for Drum Brakes (Does both sides)
Similar to the originals
Fits 1964 - 1972
.