Bolts & Fasteners
Showing 181–192 of 242 results
Hood Adjustment Bumper Kit (Front)
6 Pc Hood Adjustment Bumper Kit
These are the Correct Hood Adjustment Bumpers and Nut Retainers found on our Buick's
Fits 1970 - 1972 (Front of Hood)
Kit includes:
Note: Once you have your hood height set you can use a 3/4" wrench to tighten (clockwise) the Adjuster as shown in the photo!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Key Words . . . Hood Bumpers, Hood Adjusters
- 3) Front Adjustment Bumpers
- 3) Retainer Nuts
Note: Once you have your hood height set you can use a 3/4" wrench to tighten (clockwise) the Adjuster as shown in the photo!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Key Words . . . Hood Bumpers, Hood Adjusters 
Hood Adjustment Retainer Nuts
Front Hood Bumper Retainer Nuts - 3 Pack
These are the correct retainer nuts found in the core support to house the Hood Bumpers
Fits 1970 - 1972 (Each car uses 3 of these)
Nice Reproduction Made in the USA!
Helpful Hint: Once you have these adjusted they're meant to be locked down. You can use a 3/4" Open Ended wrench to twist the top half to the "Lock Position" (Clockwise)
Note: I have the Correct Hood Bumpers also. Click the Link for details.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Helpful Hint: Once you have these adjusted they're meant to be locked down. You can use a 3/4" Open Ended wrench to twist the top half to the "Lock Position" (Clockwise)
Note: I have the Correct Hood Bumpers also. Click the Link for details.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Idler Arm Mounting Hardware
This is the correct hardware used to mount your Idler Arm
Kit Includes:
- 2) Idler Arm Bolts
- 2) GM Washers (Thick)
- 2) Zinc Lock Nuts
Inspection Cover Bolt Kit – Automatic Trans
Flexplate Inspection Cover bolts
Typically Fits 1964 - 1972 GM Automatic Transmissions
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Inspection Cover Bolts – Manual Trans
Flywheel Inspection Cover bolts
Typically Fits 1965 – 1972 GM Manual Transmissions
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Kick Panel Screws – Hex Style
10 Pc Set of the Hex Style Screws used to hold Non A/C Kick Panels in place.
Buick has used Hex Style and Phillips Style Screws over the years. I offer both.
Correct for 1970 - 1972 GM A-Body Cars - (And I'm sure other years as well)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Kick Panel Screws – Phillips Style
10 Pc Set of the Phillips Style Screws used to hold Non A/C Kick Panels in place.
Buick has used Hex Style and Phillips Style Screws over the years. I offer both.
Correct for 1970 - 1972 GM A-Body Cars - (And I'm sure other years as well)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Kick Panel Screws – Wafer Style
10 Pc Set of the Wafer Style Screws used to hold Non A/C Kick Panels in place.
Buick has used Hex Style and Phillips Style Screws over the years. I offer both.
We have also encountered this style screw as well.
Correct for 1970 – 1972 GM A-Body Cars – (And I’m sure other years as well)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
License Plate Bracket Rubber Bumper (1970)
Reproduction Rubber Bumper for License Plate Brackets
Fits 1970 Style Bumpers for the License Plate Bracket (or anything with a 3/8″ hole)
$4.00 is for the PAIR
Note: These fit perfect in a 3/8″ hole. Please check the hole size if using on other years.
Another trick if using in a hole bigger than 3/8″ is to use a washer BEHIND the rubber bumper to keep it in place.
Side Note: In 1970 these rubber bumpers were inserted into the Bumper itself.
In 1971 & 1972 they were inserted into the License Plate Bracket (which does have a 5/16″ hole)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Note: These fit perfect in a 3/8″ hole. Please check the hole size if using on other years.
Another trick if using in a hole bigger than 3/8″ is to use a washer BEHIND the rubber bumper to keep it in place.
Side Note: In 1970 these rubber bumpers were inserted into the Bumper itself.
In 1971 & 1972 they were inserted into the License Plate Bracket (which does have a 5/16″ hole)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
License Plate Bracket Rubber Bumper (1971/72)
Reproduction Rubber Bumper for License Plate Brackets
Fits 1971 & 1972 Style License Plate Brackets or anything with a 5/16" hole.
$4.00 is for the PAIR
Note: These fit perfect in a 5/16" hole. Please check the hole size if using on other years besides 1971 or 1972 Bumpers.
Another trick if using in a hole bigger than 5/16" is to use a washer BEHIND the rubber bumper to keep it in place.
Side Note: In 1970 these rubber bumpers were inserted into the Bumper itself.
In 1971 & 1972 they were inserted into the License Plate Bracket (which does have a 5/16" hole)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Note: These fit perfect in a 5/16" hole. Please check the hole size if using on other years besides 1971 or 1972 Bumpers.
Another trick if using in a hole bigger than 5/16" is to use a washer BEHIND the rubber bumper to keep it in place.
Side Note: In 1970 these rubber bumpers were inserted into the Bumper itself.
In 1971 & 1972 they were inserted into the License Plate Bracket (which does have a 5/16" hole)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
License Plate Mounting Hardware
License Plate Mounting Hardware as used by GM
These are a nice reproduction of the Mounting Hardware used to install your License Plate
Kit includes:
- 2) Screws
- 2) Plastic Push Nuts
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Master Cylinder and Brake Booster Nuts (Flanged)
Phosphate Plated Flange Nuts as used by GM for mounting the Master Cylinder and Brake Booster
6 Pack for $5.00
.
Note: GM used both standard nuts & flange nuts on the Master Cylinder & Brake Booster. We don't know what the deciding factor was but we offer both!
.
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
.
[gallery ids="12499,12500"]
.