Bolts & Fasteners
Showing 133–144 of 239 results
Cross Shaft Locking Nuts
Correct Cross Shaft Locking Nuts
Fits 1964 - 1972
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Dash – Radio – Steering Column Cover Mounting Kit
Dash, Radio and Steering Column Hardware Kit
Kit Includes:
- 8) Dash Bezel Mounting Screws
- 4) Steering Column Mounting Screws
- 2) Radio Bezel Mounting Screws
- 4) Radio Mounting Nuts
- 2) Radio Mounting Spring Nuts
Dash Pad Mounting Hardware
Dash Pad Mounting Hardware Kit
Kit includes:
- 3) Dash Pad Mounting Flange Nuts (Gold Cad)
- 2) Dash Pad Mounting Screws
Door & Window Hardware Kit
48 Pc Door & Window Hardware Kit.
Provides enough hardware to properly mount your Door Handles and Window Mechanism.
Kit Includes:
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
- 16) Gold Cad Nuts
- 8) Large Washer Bolts
- 24) Small Washer Bolt
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Door Glass Mounting Nut
Correct GM Nut used by Buick to mount your Front & Rear Side Glass into the window mechanisms
There are generally 16 of these in a Buick A-Body (1970 - 1972)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Door Glass Mounting Washer
Correct GM Washer used by Buick to mount your Front & Rear Side Glass into the window mechanisms
There are generally 16 of these in a Buick A-Body (1970 - 1972)
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Door Jamb Vent & Qtr Seal Screw Kit
These are the correct Screws needed to install your Door Jamb Vents and Qtr Seals
Kit includes the following:
- 2) Door Jamb Vent Mounting Screws
- 6) Phillips Screws for Qtr Seals
- 2) Phillips Screws for Qtr Seal / Rear Panel (These are the 2 Longer Screws that go into the side of the Qtr Seal and the Rear Panels)
Door Latch Mounting Screws
Door Latch Mounting Screws
Correct for 1968 - 1972
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Door Panel Screws
10 Pc Kit provides enough screws to mount your Door Panels.
Note:
1970 Doors typically required 4 Screws per Door
1971 & 72 Doors typically required 5 Screws per Door
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Engine Bay Wire Harness Fastener Kit (1970/71)
This Kit includes all the Wire Harness Fasteners needed in your Engine Bay
This kit is typically found on the 1970/71 Models that utilized Straps for the Engine Harness on the Firewall.
Buick Switched to a Plastic Clamp for the Engine Harness in 1972 as found in our other Kit.
Kit Includes:
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
- 2) Positive Battery Cable Clamps
- 2) Headlight Harness / Wiper Hose to Inner Fender Straps
- 3) Headlight Harness to Core Support Straps
- 2) Engine Harness to Firewall Straps
- 1) Blower Motor Wire Clamp + Mounting Screw
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Engine Bay Wire Harness Fastener Kit (1972)
This Kit includes all the Wire Harness Fasteners needed in your Engine Bay
This kit is typically found on the 1972 Models that utilized a Clamp for the Engine Harness on the Firewall.
Buick used a Strap on most of the 1970/71 Models as provided in our other Kit
Kit Includes:
- 2) Positive Battery Cable Clamps
- 2) Headlight Harness / Wiper Hose to Inner Fender Straps
- 3) Headlight Harness to Core Support Straps
- 2) Engine Harness to Firewall Clamps + Mounting Screws
- 1) Blower Motor Wire Clamp + Mounting Screw
For a Bigger Photo of this check out our Factory Diagrams Section!
Stage 1 Restoration has the most hardware of any vendor for the 1970 – 1972 GS / GSX & Skylark Models.
Don’t see what you need ? Give me a call, we probably have it!
Engine Bolts – Assortment (Factory GM)
I have a Drawer full of Factory GM Engine Bolts from 350 & 455 Engines
If you need a particular engine bolt give me a call!
Most of them are clean and ready to install
Here's a portion of what I have: (If it's not listed I probably have it!)
- Intake Bolts
- Head Bolts
- Timing Cover Bolts
- Starter Bolts
- Alternator mounting Bolts
- Oil Pan Bolts
- Valve Cover Bolts
- Oil Pump Housing Bolts
- Harmonic Balancer Bolts
- Rocker Arm Bolts
- Windage Tray Bolts