Back to Drivetrain

Center Cap – Single (1970)

$45.00

A nice reproduction Center Cap featuring the Buick Tri Shield

Correct for 1970 Models

Also includes Locking Bar to lock the cap to your wheel!

Note: The manufacture does NOT provide Screws for the Locking Bars so you will need to come up with those. Typically these are a #10 screw (Self Tapping)

$45.00 for 1 single cap

 

 

The photo below shows the locking bar which can be installed with a couple screws to lock the center cap to the wheel. You can’t pull the center cap off without removing the wheel. That way nobody can steal your caps!

 

Also Note: The screws that the manufacture provides we feel are to short to do there job properly so we swap them out with longer screws. We also assemble the caps prior to shipping them. You will not get this service with any of the big name vendors!

The photo below shows the Supplied screw size on the left and the size we swap out on the right. These are the 4) screws that hold the retainer to the cap. (Not the Locking Bar Screws)

 

.

SKU: 3186 S Category: